Trenched irrigation mains, valve manifolds and sleeves for lawns, athletic fields and commercial landscapes that need water they can count on.
A good irrigation system starts with its mains. The pressurized line from the water source to the valve boxes is buried deep and expected to last, and a leak in it can turn into a sinkhole in a lawn. Doing the trenching and piping well lets the irrigation crew focus on heads and zones.
We trench and install irrigation mains, set valve manifold boxes at the right locations and place sleeves under driveways and walks before paving. The work coordinates with your irrigation designer and landscaper so the pipe goes where the plan needs it, and the trench is closed before the sod goes down.
Installing sleeves under future driveways, walks and parking lots avoids cutting new concrete later. We set and mark them so the irrigation crew can find the ends.
Mains carry full line pressure. Joints, restraint and depth follow the design so lines survive frost and traffic.
Landscape and irrigation schedules overlap. We coordinate so the trench is open when needed and closed and compacted before sod, seed or beds are installed.
Irrigation mains need to be drained or blown out where freezing is possible, and valve boxes need accessible drains. We plan the system with a low point and a drain so winter does not damage it.
Drag the handle to compare.
BeforeAfterEstates, campuses and sports fields.
Pipe set below frost and traffic.
Boxes placed to the plan.
Set before concrete and asphalt.
Trench timing matched to landscaping.
No settling under new sod.
Every topic has its own page with what to expect and how we approach it.
SituationCommercial and IndustrialUtilities for stores, offices and industrial sites: fire lines, vaults, sewer, storm, power and conduit, built to the…Learn more 
SituationRural and AcreageLong runs for water, power, propane and septic on farms and country lots, through rock, creeks and fields.Learn more 
Material guideHDPE PipeFlexible black polyethylene pipe for bores, pipe bursting, force mains and water lines, joined by heat fusion into…Learn more Enter trench length, width and depth and see cubic yards of soil, truckloads and bedding stone to plan for.
Tell us what you need and send photos or a site plan if you can. We plan the visit so we arrive ready.
We call 811, walk the site, confirm lines and plan the route and depth.
You get a clear written price, and we agree a day and an arrival window.
Trenching or boring to the plan, with safe walls, careful spoil handling and protection for your lawn.
Pipe or conduit laid on a good bed, joints checked, tests and inspections done before cover-up.
Compacted backfill, grading, sod or paving repair and a walk-through with you.
We focus on the underground mains, sleeves and manifolds. Heads and controllers are usually installed by the irrigation contractor, and we coordinate with them.
Often. Boring or sleeves placed in advance protect the surface and save restoration work.
Depth depends on pressure, frost and traffic. We build to the design and local practice.
Yes. We tie into the existing line with the right fittings and restore the lawn afterward.
In many areas, yes. Systems are drained or blown out before hard freezes, and good design makes that easy.
Utility TrenchingStraight, clean trenches for water, sewer, electric, gas and communication lines, cut to depth and width by machines…Explore 
Road and Driveway CrossingsShort bores that carry water, sewer, power or conduit under roads, driveways and walks, leaving the surface unbroken.Explore 
Water Service LinesThe line from the water main to your house or building, trenched, laid and connected so water arrives…Explore 
Excavation and BackfillDigging, bedding and backfilling done in layers with proper compaction, so the ground does not sink after the…Explore Tell us about the job and we will call you back quickly.
Or call (615) 357-7797 to talk now.
