Trenches, conduit, pull boxes and pole bases for parking lot, walkway and landscape lighting circuits.
Light poles in a parking lot look simple, but each one stands on a concrete base with conduit coming up through it, and every base connects to a buried circuit. If that underground system is built poorly, the lights flicker, fail or cannot be serviced without tearing up the lot.
We trench and bore the routes, install conduit and pull boxes, set and form pole bases with anchor bolts at the right layout and stub conduit into each base. Work is sequenced around paving, so conduit is in before the asphalt and the bases are ready when the pole crew arrives.
Pole bases must land on the lighting plan. We stake from the drawing, check dimensions and fix any conflicts with islands, curbs and drains before the concrete is poured.
Crossing a lot after it is paved means cutting asphalt. We install conduit and sleeves at the right time so the new surface stays intact.
Pull boxes need to be at grade and accessible. We set them where electricians can open them later without moving anything heavy.
Bulbs and drivers fail, and cable can be damaged. Accessible pull boxes and clear route records make repairs quick and avoid digging up a lot.
Drag the handle to compare.
BeforeAfterBases staked from the drawing.
No cutting new asphalt.
Set level at grade.
Template-checked layout.
Concrete finished and cured.
In step with paving and electricians.
Every topic has its own page with what to expect and how we approach it.
SituationCommercial and IndustrialUtilities for stores, offices and industrial sites: fire lines, vaults, sewer, storm, power and conduit, built to the…Learn more 
SituationDevelopers and BuildersInfrastructure for subdivisions and multi-lot projects: schedules, sequencing, inspections and clean hand-offs to the next trades.Learn more 
Material guideElectrical ConduitPVC, rigid steel, HDPE and flexible conduit: which kind goes where, how deep it is buried and how…Learn more Enter trench length, width and depth and see cubic yards of soil, truckloads and bedding stone to plan for.
Tell us what you need and send photos or a site plan if you can. We plan the visit so we arrive ready.
We call 811, walk the site, confirm lines and plan the route and depth.
You get a clear written price, and we agree a day and an arrival window.
Trenching or boring to the plan, with safe walls, careful spoil handling and protection for your lawn.
Pipe or conduit laid on a good bed, joints checked, tests and inspections done before cover-up.
Compacted backfill, grading, sod or paving repair and a walk-through with you.
We build the bases and conduit. Pole setting and wiring are done by the electrical contractor.
Yes. We bore or cut and patch where needed and install new bases.
Depth depends on the code and the location. We build to the plans and local requirements.
Yes. Smaller circuits are trenched and conduit is installed for the electrician.
Pull boxes at accessible locations let an electrician test sections without digging.
Conduit and Duct BanksSingle conduits and multi-duct banks, spaced, supported and encased so cable can be pulled now and added later.Explore 
Road and Driveway CrossingsShort bores that carry water, sewer, power or conduit under roads, driveways and walks, leaving the surface unbroken.Explore 
Commercial Site UtilitiesUnderground water, sewer, storm, fire and electrical systems for stores, offices, warehouses and industrial buildings.Explore 
Generator and EV TrenchingTrenches, conduit and pads for standby generators, EV chargers, hot tubs and outbuildings, so your electrician can finish…Explore Tell us about the job and we will call you back quickly.
Or call (615) 357-7797 to talk now.
